Interface Capabilities
5 Optically isolated Digital Inputs : 5 Digital Outputs : 1 RS232 and 1
RS485 port with Modbus, DLMS, IEC101, DNP3 support : 1 USB port
for Configuration using RNDNS, SD card slot for extended Data
storage
Industrial Protocol Support
Modbus RTU Master
Modbus TCP Master
IEC 60870-5-101 Master / Slave
IEC 60870-5-104 Master / Slave
IEEE 62056-21 DLMS
DNP3 Slave
DLMS Master
XE-33 XIO Series
High speed, rugged edge computing LTE RTU with Digital I/Os and IEC 104
Control and Monitor your assets on a real time basis with XE33#XIO
series, with a host of local connectivity interfaces viz Ethernet,
Serial, USB, Digital Inputs, Digital Outputs and Analog Inputs.
Packed with a powerful CPU, aided by intelligent programmable
Linux based embedded software, host of Industrial protocols
natively supported, and seamless integration with DNET, the XE-33
series is a perfect choice for Enterprise, Industrial and IOT
deployments.
Applications
• Distribution Transformer Monitoring
• Fault Detection
• Load Break Switches monitoring and Control
• RMU Monitoring and Control
• Value and Pump Monitoring and Control
• Industrial Automation
Equipment
Monitoring and
Control
Industrial
Protocol
Support
IOT Cloud
Connectors
Distribution Transformer Monitoring
Fault Detection
Security
Device Specifications
Hardware Interfaces for XE-33XIO#1C
1 X USB 2.0 type C for console access
1 X RS232
1 X RS485 half Duplex
1 X CAT 4 LTE Cellular
2 X Micro SIM
5 Isolated Digital Inputs – 0 to VCC
5 Digital Outputs – 200mA Open Collector
Hardware Details
CPU- 1.2 Ghz
Flash – 100 MB, SD Card
RAM – 100 MB
Cellular
LTE FDD: B1/B3/B5/B8
LTE TDD: B34/B38/B39/B40/B41
TD-SCDMA: B34/B39
WCDMA: B1/B8
GSM: 900/1800MHz
Cellular Data Rates
LTE CAT 4:
LTE FDD: Max 150Mbps (DL)/Max 50Mbps (UL)
LTE TDD: Max 130Mbps (DL)/Max 30Mbps (UL)
UMTS:
DC-HSDPA: Max 42Mbps (DL)
HSUPA: Max 5.76Mbps (UL)
WCDMA: Max 384Kbps (DL)/Max 384Kbps (UL)
GSM:
EDGE: Max 296Kbps (DL)/Max 236.8Kbps (UL)
GPRS: Max 107Kbps (DL)/Max 85.6Kbps (UL)
LED
Power / Boot LED
Signal Strength
Device Network Registration
Cellular Data Activity
Digital Inputs and Outputs
Dimensions
90mm x 75mm x 50mm
Weight – 400 gms
ABS Base and Polycarbonate Top
IP65
Wall mount via clamps
Power
240V AC with 2000 or 4000 mAh Battery
Max Power consumption:
XE33XIO#1C# Lite – 4W
Avg Power Consumption: 2W
Operating Temperature
-30 to +70 degree Celsius
Routing Features
DHCP Server, DHCP Client, Static Routes, Traffic Routing,
Port Forwarding, Dynamic DNS, NAT
Performance Redundancy
Data Connectivity Watchdog and Hardware Watchdog
Security and Tunnelling
IPSec with IKEV1, IKEV2, Selectable encryption schemes,
Selectable Hash Algorithms and Dead Peer Detection
Zone Based Firewall
Stateful packet inspection and Sync Flood Protection
Sim Pin
Source / Destination IP address binding
Management
Web based local and remote configuration
SNMP V1, V2, V3
Industrial Protocol support
Modbus Master
IEC 101 Master / Slave
IEC 104 Master / Slave
Modbus to IEC 104 Convertor
IEC 101 to IEC 104 Convertor
DNP3 Slave
DLMS Master
Connectivity Protocols
TCP/UDP/FTP/HTTP/MQTT/NTP/ICMP/HTTPS*/SMTP*/FT
PS*/SMTPS*
Programming Capabilities
Linux Operating System
Development APIs